OPERATING PROCEDURE (CONT’D) Operating In Water Mud and water should be removed from the machine before parking. In freezing temperatures, park the machine on planks or concrete to prevent the track or undercarriage from freezing to the ground and preventing machine movement. Figure OI-115 Maximum Water Level MS1854 Do not operate or immerse the excavator in water higher than the bottom of the swing circle [Figure OI-115] . Grease the excavator when it has been operated or immersed in water for a period of time. Greasing forces the water out of the lubrication areas. Water must be removed from the cylinder rods.
If water freezes to the cylinder rod, the cylinder seals can be damaged when the rod is retracted. 325/328 Excavator Operation and Maintenance Manual 50