Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

LIFTING THE EXCAVATOR Attach chains to the ends of the blade (Item 1) [Figure OI-122] and [Figure OI-123] and up to a lifting fixture above the canopy/cab. The lifting fixture must extend over the sides of the canopy/cab to prevent the chains from hitting the ROPS/TOPS. Procedure Figure OI-122 Figure OI-124 2 1 1 P-49456 Fully extend the cylinders of the bucket, arm, and boom so that the excavator is in the position as shown [Figure OI-122] . N-23184 Install a 25 mm bolt and nut (Grade 5 or 8) through the holes at the boom (Item 2) [Figure OI-122] and [Figure OI-124] . Attach a chain from the bolt to the lift fixture. Raise the blade fully. Put all the control levers in neutral.

WARNING AVOID INJURY OR DEATH Use a lifting fixture with sufficient capacity for the weight of the excavator plus any added attachments. Maintain centre of gravity and balance when lifting. Do not swing boom or upperstructure. Engage the swing locking lever. Never lift with operator on machine. W-2202-0595 Figure OI-123 2 P-50050 325/328 Excavator 53 Operation and Maintenance Manual