Cummins — Cummins CM2220 R2.8 Installation Guide R101B

Coolant Recommendations and Specifications R2.8 CM2220 R101B Page V-8 Section V - Maintenance Specifications Coolant Recommendations and Specifications Fully Formulated Coolant/Antifreeze Cummins Inc. recommends the use of fully formulated antifreeze/coolant meeting Cummins Engineering Standard (CES) 14603. For further details and discussion of coolant for Cummins® engines, refer to Cummins® Coolant Requirements and Maintenance, Bulletin 3666132. Typically, antifreeze/coolants meeting American Society of Testing and Materials (ASTM) D3306 or ASTM D6210 criteria are acceptable antifreeze/coolants for the engines covered by this manual. Cummins Inc.

recommends using either a 50/50 mixture of water (see water quality table) and fully formulated antifreeze, or fully formulated coolant when filling the cooling system. Water quality is important for cooling system performance. Excessive levels of calcium and magnesium contribute to scaling problems, and excessive levels of chlorides and sulfates cause cooling system corrosion. Cummins Inc. recommends using Fleetguard® Compleat™. It is available in both glycol forms (ethylene and propylene).

To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com Water Quality Calcium Magnesium (hardness) Maximum 170 ppm as (CaCO + MgCO3) 3 Chloride Maximum 40 ppm as (CI) Sulfur Maximum 100 ppm as (SO ) 4