R2.8 CM2220 R101B Coolant Recommendations and Specifications Section V - Maintenance Specifications Page V-9 Fully formulated antifreeze must be mixed with water (see water quality table) at a 50/50 ratio (40- to 60-percent working range). A 50/50 mixture of antifreeze and water gives a -36°C [-33°F] freezing point and a 108°C [226°F] boiling point, which is adequate for locations in North America. The actual lowest freezing point of ethylene glycol antifreeze is at 68 percent. Using higher concentrations of antifreeze will raise the freezing point of the solution and increase the possibility of a silica gel problem.
Legend 1 Freezing Point Temperature Scale 2 Boiling Point Temperature Scale A refractometer must be used to measure the freezing point of the coolant accurately. Use Fleetguard® refractometer, Part Number C2800. Do not use a floating ball hydrometer. The use of floating ball hydrometers can result in incorrect readings. Cooling System Sealing Additives Do not use sealing additives in the cooling system. The use of sealing additives will: Cause buildup in coolant low-flow areas Plug the radiator and oil cooler Possibly damage the water pump seal. To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com