Cooling System R2.8 CM2220 R101B Page 1-20 Section 1 - Installation by Subsystem 1 Fan hub: counterclockwise rotation at 1.1 times engine speed Figure 4 - Mechanical Fan Drive 2 Bearing plate - 8.4 mm [0.33 in] 3 Distance between crankshaft centerline and fan hub centerline - 175 mm [6.9 in] 4 Four M10 x 1.5 threaded holes on 60 mm [2.36 in] bolt circle. Torque to 43 N•m [32 ft-lb] in a crisscross pattern. Cab Heater Supply and Return Coolant Connections The engine has two provisions for supplying engine coolant to the cab heater core. Figure 5 - Coolant Supply for Heater Core An engine coolant outlet connection is located below the thermostat housing.
This connection is for coolant supply to the heater core. See Figure 5 above. Cab Heater Supply Connection Outside Diameter: 17 mm [0.7 in] Clamping Distance: 14 mm [0.6 in] from the end To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com