Cummins — Cummins CM2220 R2.8 Installation Guide R101B

Air Intake System R2.8 CM2220 R101B Page 1-26 Section 1 - Installation by Subsystem Figure 2 - Turbocharger Compressor Outlet Connection 1 Turbocharger compressor outlet, 66 mm [2.5 in], 24 mm [0.9 in] clamping distance. The air flow through the CAC and radiator is affected by many factors that can lead to poor performance of either heat exchangers. Maximizing the ambient air flow through the heat exchangers provides the greatest impact to the efficiency of the heat exchangers to transfer heat away from the charge air and engine coolant.

Charge Air Cooling and Radiator System Design The goal of the radiator and CAC system design must be to enable the cooling ambient air get to the radiator core. The blockage of the radiator core by the CAC must be avoided. See Figure 3 and Figure 4. Figure 3 - Good Radiator and CAC Design The CAC tanks do not block the radiator core area. Part of the radiator core receives cooling ambient air. To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com