R2.8 CM2220 R101B Steering and Braking Section 1 - Installation by Subsystem Page 1-33 A single vane, vehicle-brake vacuum pump is located at the front of the cylinder head, driven from the camshaft. Connect a valve to the vacuum line connection between the pump and vehicle air reservoir to prevent engine oil from entering the reservoir. The valve must also be located above the vacuum reservoir. The vacuum hose connection on the pump is 9 mm [0.35 in] with a clamping distance of 23 mm [0.90 in]. Figure 3 - Power Steering Pump Banjo Connection To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com Figure 4 - Vacuum Pump Connection