Electrical System R2.8 CM2220 R101B Page 1-40 Section 1 - Installation by Subsystem 1 ECM Figure 5 - Engine-Side Harness 2 120 ohm termination resistor 3 23 pin bulkhead Deutsch pass-through connector 4 30 amp fuse 5 Battery 6 Terminal connector to grid heater post on engine 7 Grid heater relay 8 [3/16 in] Stud grid heater relay ring terminals 9 Fan Hi signal - brown; Fan ground - white 10 23 pin Deutsch connector detail 11 Panel nut 12 Lockwasher 13 Panel 14 Locating flat The cab-side harness includes a 23 pin Deutsch mating interface connector, an output data cab display, an accelerator pedal assembly, data link connector, provisions for fan controls, and dash lights.
Figure 6 identifies these components on the cab-side harness and the length of each lead. 15 Connector receptacle To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com