Bobcat Company 442 — Connecting Rod, Checking

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-208 Connecting Rod, Checking Figure 60-80-206 b 1 2 a P-63057 Replace small end bushing as needed [Figure 60-80- 208] . B-14701 Bore for Small End Bushing . . . . . . 1.457 + 0.0008 inch. (37,0 + 0,02 mm) O.D. of Small End Bushing . . . . . . . .1.4539 - 1.461 inch. (39,93 - 37,11 mm) When checking the connecting rod large and small end, measure at the points (1) and (2) and in planes (a) and (b) [Figure 60-80-206] . Figure 60-80-207 Figure 60-80-209 P-56770 P-56774 Press in the small end bushing, make sure the lubrication holes are in alignment [Figure 60-80-209] . Check the small end bushing [Figure 60-80-207] .

Specifications: I.D. of Small End Bushing . . . . . . . . . 1.338 - 1.340 inch. (33,975 - 34,035 mm) Wear Limit Bushing Clearance . . . . . . . . . . . 0.003 inch. (0,08 mm) 442 Excavator 60-80-58 Service Manual