Bobcat Company 442 — Piston Installation On The Connecting Rod

RECONDITIONING THE ENGINE (S/N 522311001 & ABOVE) (CONT’D) Figure 60-80-223 Piston Installation On The Connecting Rod Figure 60-80-221 P-63062 The flywheel symbol on the piston and dowel pins on the connecting rod must be located on the same side [Figure 60-80-223] . P-63061 Figure 60-80-224 Install the snap ring [Figure 60-80-221] . NOTE The ring gap of the snap rings must face toward the piston crown. Figure 60-80-222 P-63063 Install the snap ring [Figure 60-80-224] . NOTE: The ring gap of the snap rings must face toward the piston crown. P-63065 Install the piston on the rod. Install the piston pin [Figure 60-80-222] . 442 Excavator 60-80-64 Service Manual