RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-27 Assembly 1 Figure 60-81-25 2 3 P-56907 Install the heater oil pressure control valves and springs as shown [Figure 60-81-27] . P-56904 (Item 1) [Figure 60-81-27] 14.5 PSI (1 bar) spring, marked yellow Install the thermostat and spring [Figure 60-81-25] . Figure 60-81-26 (Item 2) [Figure 60-81-27] 24.7 PSI (bar) spring, marked red (Item 3) [Figure 60-81-27] 4.4 PSI (bar) spring, marked blue Figure 60-81-28 1 P-56905 2 Install the plug and tighten to 82 ft.-lb. (111 N•m) torque. [Figure 60-81-26] . P-56908 Install the fittings (Item 1) and plugs (Item 2) [Figure 60- 81-28] .
Tighten the fittings and plugs to 83 ft.-lb. (111 N•m) torque. 442 Excavator 60-81-9 Service Manual