Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-31 Assembly (Cont'd) Figure 60-81-29 P-56912 Install the oil temperature sending unit. Tighten the sending unit to 17-20 ft.-lb. (22.5-27.5 N•m) torque [Figure 60-81-31] . P-56910 Figure 60-81-32 Install and tighten the plug to 37 ft.-lb. (50 N•m) torque [Figure 60-81-29] . Figure 60-81-30 P-56913 Install the tappets [Figure 60-81-32] . P-56911 Install the oil pressure switch and tighten to 102-128 in.- lb. (11.5-14.5 N•m) torque [Figure 60-81-30] . 442 Excavator 60-81-10 Service Manual