RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-71 Assembly (Cont'd) Figure 60-81-69 P-56947 Install the oil pump on the engine block [Figure 60-81- 71] . P-56945 Figure 60-81-72 Tighten the bolt finger tight. The gear must turn freely [Figure 60-81-69] . Figure 60-81-70 CD-15472 Tighten the oil pump bolts to 14-17 ft.-lb. (18,9-23,1 N•m) torque [Figure 60-81-72] . P-56946 Install the engine timing belt. (See Timing Belt Installation on Page 60-51-22.) Install the gasket on the oil pump [Figure 60-81-70] . 442 Excavator 60-81-20 Service Manual