Bobcat Company 442 — Assembly

RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-99 Assembly (Cont'd) Figure 60-81-97 CD-15490 Put sealing compound on the sealing surface of the oil pan [Figure 60-81-99] . CD-15488 Install the oil pan Initially install the corner bolts first and tighten to 5 in.-lb. (0,5 N•m) torque. Put sealing compound on the sealing surface of the oil suction pipe [Figure 60-81-97] . Figure 60-81-100 Figure 60-81-98 B-14696 CD-15489 Install the oil pan bolts and tighten to 15 ft.-lb. (21 N•m) torque as shown in [Figure 60-81-100] . Install the oil suction pipe and tighten the bolts to 15 ft.-lb. (21 N•m) torque [Figure 60-81-98] .

Install the oil pan plug and tighten to 40 ft.-lb. (55 N•m) torque. Install the flywheel. (See Removal And Installation on Page 60-71-1.) Install the turbocharger. See “Turbo Charger Removal and Installation” on page 70. Install the starter. (See Removal And Installation (S/N 528911001 & Above And S/N 528611001 & Above) on Page 50-40-1.) Install the alternator. (See Removal And Installation (S/N 528911001 & Above And 528611001 & Above) on Page 50-30-3.) 442 Excavator 60-81-27 Service Manual