RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-139 Crankshaft, Checking Put the crankshaft on v-blocks. Check the main bearing journals: Specifications: Journal Diameter . . . . . . . . . . . . . . 2.7538 - 2.7546 inch. (69,97 - 69,99 mm) Each Undersize . . . . . . . . . . . . . . . . . . . . . . . 0.010 inch. (0,25 mm) Undersize Limit . . . . . . . . . . . . . . . . . . . . . . 2.7348 inch. (69.47 mm) P-56761 Figure 60-81-138 Check the connecting rod journals [Figure 60-81-139] . Specifications: Pin Diameter . . . . . . . . . . . . . . . . . 2.1588 - 2.1596 inch. (54,97 - 54,99 mm) Undersize Limit . . . . . . . . . . . . . . . . . . . . . .
2.1448 inch. (54,47 - 54,49 mm) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0004 inch. (0,1 mm) Figure 60-81-140 P-56760 Check the thrust bearing width [Figure 60-81-138] . Specifications: Journal Width . . . . . . . . . . . . . . . . . . 1.378 +0.0016 inch. (35 + 0,04 mm) Limit Oversize . . . . . . . . . . . . . . . . . . . . . . . . 1.395 inch. (35,44 mm) Each Oversize . . . . . . . . . . . . . . . . . . . . . . . . 0.016 inch. (0.4 mm) P-56762 Use a dial indicator and check crankshaft for out of roundness [Figure 60-81-140] . Specifications: Out of Roundness Max.. . . . . . . . . 0.002 inch. (0,05 mm) 442 Excavator 60-81-39 Service Manual