RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-144 Connecting Rod, Checking Figure 60-81-142 b 1 2 a P-56773 Replace small end busing as needed [Figure 60-81- 144] . B-14701 Bore for Small End Bushing . . . . . . 1.299 + 0.0008 inch. (33 + 0,02 mm) O.D. of Small End Bushing . . . . . . . 1.3017 - 1.303 inch. (33,07 - 33,11 mm) When checking the connecting rod large and small end, measure at the points (1) and (2) and in planes (a) and (b) [Figure 60-81-142] . Figure 60-81-143 Figure 60-81-145 P-56770 P-56774 Press in the small end bushing, make sure the lubrication holes are in alignment [Figure 60-81-145] .
Check the small end bushing [Figure 60-81-143] . Specifications: I.D. of Small End Bushing . . . . . . . . . . 1.18 - 1.182 inch. (30.025 - 30.035 mm) Wear Limit Bushing Clearance . . . . . . . . . . . 0.003 inch. (0,08 mm) 442 Excavator 60-81-41 Service Manual