RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-148 Connecting Rod, Checking (Cont'd) Figure 60-81-146 P-56768 Tighten the connecting rod cap nuts as follows [Figure 60-81-148] . CD-15450 Initial Torque . . . . . . . . . . . . . . . . . . . . 22 ft.-lb. (30 N•m) 1st Step Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60° 2nd Step Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60° After pressing in the small end bushing, bore the bushing to the following dimensions [Figure 60-81-146] . Specifications: I.D. of Small End Bushing . . . . . . . . . . 1.181-1.182 inch.
(30.025 - 30.035 mm) Figure 60-81-147 2908 2908 CD-15451 Install the correct cap on the correct rod [Figure 60-81- 147] . 442 Excavator 60-81-42 Service Manual