RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Valve seat angle: Specifications: Intake Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30° Exhaust Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45° Valves, Checking Figure 60-81-163 Figure 60-81-165 P-56793 P-56795 Measure the valve stem diameter [Figure 60-81-163] . Measure the valve seat width [Figure 60-81-165] . Specifications: Width (Intake) . . . . . 0.062 ± 0.016 inch. (1,58 ± 0,4 mm) (Exhaust) . . . . . 0.067 ± 0.016 inch. (1,7 ± 0,4 mm) Std. Intake Valve . . . . . . . . . . . . . . . . . . .0.3134-0.314 in (7,97-7,98 mm) Std. Exhaust Valve. . . . . . . . . . .
. . . . . . .0.3124-0.313 in (7,95-7.96 mm) Figure 60-81-166 Figure 60-81-164 Angle Thickness P-56796 P-56794 Diameter Install the valves and measure the valve stem clearance [Figure 60-81-166] . Measure the valve edge thickness [Figure 60-81-164] . Specifications: Intake Valve . . . . . . . . . . . . . . . . .0.055 inch. (1,4 mm) Exhaust Valve. . . . . . . . . . . . . . . . .0.05 inch. (1,2 mm) Wear Limit: Intake Valve . . . . . . . . . . . . . . . 0.0197 inch (0.5 mm) Exhaust Valve. . . . . . . . . . . . . . 0.0511 inch (1.3 mm) Measure the valve head diameter [Figure 60-81-164] . Specifications: Intake Valve . . . . . 1.594 ± 0.004 inch (40,5 ± 0,1 mm) Exhaust Valve . .1.374 ± 0.004 inch.
(34,9 ± 0,01 mm) 442 Excavator 60-81-49 Service Manual