RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Valve Clearance Adjustment Figure 60-81-167 P-56797 Measure the valve clearance between the valve head and cylinder head sealing surface [Figure 60-81-167] . Valve penetration into cylinder head: Specifications: Wear Limit . . . . . . . . . . . . . . . . .0.0512 inch. (1,3 mm) Recondition the valve seats and valve guides if worn. Figure 60-81-168 Measure valve spring free length [Figure 60-81-168] . Specifications: Valve Spring Diameter . . . . . . . .0.132 inch. (3,35 mm) Free Length . . . . . . . . . . . . . . . . .1.53 inch. (38.9 mm) Valve Spring Diameter . . . . . . . .0.134 inch.
(3,40 mm) Free Length . . . . . . . . . . . . . . . .1.547 inch. (39,3 mm) Inclination . . . . . . . . . . . . . . . . . . .0.126 inch. (3,2 mm) 442 Excavator 60-81-50 Service Manual Inclination Length Free Square B-8208 Inclination Length Free Square B-82 B-82 08