RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-171 Cylinder Head Assembly Figure 60-81-169 P-56805 Use the tool and press the valve stem as far as it will go [Figure 60-81-171] . See “Deutz Engine Tools Identification Chart” on page 1. P-56803 Figure 60-81-172 Install the valve into the cylinder head and install the protective sleeve or masking tape on the valve stem grooves [Figure 60-81-169] . Figure 60-81-170 P-56806 Install the valve spring and cap [Figure 60-81-172] . P-56804 Install the valve seal on the protective sleeve and push the seal down [Figure 60-81-170] . Remove the protective sleeve. 442 Excavator 60-81-51 Service Manual