Bobcat Company 442 — Front Cover Assembly

RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-225 Front Cover Assembly (Cont'd) Figure 60-81-223 1 2 CD-15396 Install shims of at least 0.011 inch (0,3 mm) thickness at points (Items 1 & 2) [Figure 60-81-225] . CD-15394 Figure 60-81-226 Install centrifugal governor assembly into the front cover [Figure 60-81-223] . Be careful not to damage the shaft seal. Figure 60-81-224 CD-15397 Install the governor lever shaft without the idling lever [Figure 60-81-226] . Tighten the bolts to 81 in.-lb. (9,2 N•m) torque. CD-15395 Inspect roller lever, shaft and idling lever wear [Figure 60-81-224] . Replace the parts as needed.

442 Excavator 60-81-66 Service Manual