Bobcat Company 442 — Identification

COMPONENTS (S/N 528911001 & ABOVE AND 52864001 & ABOVE) Heater Valve: The heater valve (Item 1) [Figure 70-51-6] is used to control the amount of engine coolant that flows to the heater coil. Identification (Cont’d) Figure 70-51-5 Figure 70-51-7 2 3 1 1 2 4 3 P-63561 P-32714 Fan Switch: This is a four position rotary switch (Item 1) [Figure 70-51-7] . When the fan switch is in the off position the A/C will not engage. NOTE: The evaporator coil and thermostat are not used in this application. See Upgraded A/C system [Figure 70-51-8]. Thermostat: The thermostat (Item 1) [Figure 70-51-5] is not used in this application. A/C Switch:

The rocker switch (Item 2) [Figure 70-51-7] will be illuminated when the A/C is engaged. Heater Coil: The heater coil (Item 2) [Figure 70-51-5] supplies the warm air into the cab by passing air through the coil. Temperature Control Lever: Push the lever (Item 3) [Figure 70-51-7] forward to increase the cab temperature; backward to decrease temperature Evaporator Coil: The evaporator coil (Item 3) [Figure 70- 51-5] is not used in this application. Heater/Evaporator Blower: The blower (Item 4) [Figure 70-51-5] is used to push air through the heater and evaporator coils and into the cab. Figure 70-51-6 1 P-63536 442 Excavator 70-51-2 Service Manual