GENERAL AIR CONDITIONING SERVICE GUIDELINES (CONT'D) Figure 70-90-52 Compressor Oil Check (Cont'd) Figure 70-90-50 P-63472 1 1 Add new compressor oil through the suction side connector (Item 1) [Figure 70-90-52] . P-63470 Installation: Add 150 -170 cc's of PAG oil . Remove the oil drain plug (Item 1) [Figure 70-90-50] and drain the oil through the connectors and the oil drain hole. NOTE: The suction port on the compressor is marked with an L and is the larger port on the compressor. Figure 70-90-51 P-63471 1 NOTE:
After draining the oil through the drain hole and the connectors, extract the remaining oil through the discharge-side connector by rotating the drive pulley (Item 1) [Figure 70-90- 51] several times by hand. Measure the drained oil in a measuring cylinder. Check the oil for contamination, dirt, metal shavings, or varnish color, discard the oil if contaminated. NOTE: If metal shavings are found in the compressor oil, replace the complete compressor assembly. 442 Excavator 70-90-2 Service Manual