Bobcat Company 442 — Disassembly

ARM CYLINDER (CONT’D) Figure 20-21-18 Disassembly Use the following tools to disassemble the cylinder. 2 MEL1074-O-ring Seal Hook. Hold the hydraulic cylinder over a drain pan and move the rod in and out slowly to remove the fluid from the cylinder. 1 Clamp the base end of the cylinder in a vise. Be careful not to damage the cylinder housing. P-36063 Figure 20-21-16 Remove the block (Item 1) and tube line (Item 2) [Figure 20-21-18] . Figure 20-21-19 1 1 P-36061 Support the cylinder with a block (Item 1) [Figure 20-21- 16] . Figure 20-21-17 P-36064 Remove the 12 bolts (Item 1) [Figure 20-21-19] . 1 P-36062 Remove the clamp (Item 1) [Figure 20-21-17] . 442 Excavator 20-21-6 Service Manual