Bobcat Company 442 — Disassembly

ARM CYLINDER (CONT’D) Figure 20-21-22 Disassembly (Cont’d) Figure 20-21-20 1 1 P-36067 Remove the bearing (Item 1) [Figure 20-21-22] . P-36065 NOTE: The bearing can only be removed through the snap ring side of the housing. Remove the rod assembly (Item 1) [Figure 20-21-20] . Remove the cylinder housing from the vise. Figure 20-21-23 Figure 20-21-21 1 P-36069 P-36068 Clamp the rod end in a vise. Support the end of the rod with a wood block (Item 1) [Figure 20-21-23] . Remove the snap ring (Item 1) [Figure 20-21-21] from the base end of the cylinder. Use care not to damage the rod. 442 Excavator 20-21-7 Service Manual