Bobcat Company 442 — Disassembly

BUCKET CYLINDER (CONT’D) Figure 20-23-78 Disassembly 1 Use the following tools to disassemble the cylinder. MEL1074 - O-ring Seal Hook Hold the hydraulic cylinder over a drain pan and move the rod in and out slowly to remove the fluid from the cylinder. Clamp the base end of the cylinder in a vise. Be careful not to damage the cylinder housing. P-36184 Figure 20-23-76 Remove the 12 bolts (Item 1) [Figure 20-23-78] . Figure 20-23-79 1 1 P-36182 Support the cylinder with a block (Item 1) [Figure 20-23- 76] . P-36185 Figure 20-23-77 Remove the rod assembly (Item 1) [Figure 20-23-79] . Remove the cylinder housing from the vise.

2 1 3 P-36183 Remove the clamp (Item 1), block (Item 2) and tubeline (Item 3) [Figure 20-23-77] 442 Excavator 20-23-6 Service Manual