Bobcat Company 442 — Disassembly

BUCKET CYLINDER (CONT’D) Figure 20-23-82 Disassembly (Cont’d) Figure 20-23-80 1 1 P-36190 Clamp the rod end in a vise. Support the end of the rod with a wood block (Item 1) [Figure 20-23-82] . P-36067 Remove the snap ring (Item 1) [Figure 20-23-80] from the base end of the cylinder. Use care not to damage the rod. Figure 20-23-83 Figure 20-23-81 1 1 P-36191 P-36068 Apply moderate heat to the nut (Item 1) [Figure 20-23- 83] . Remove the bearing (Item 1) [Figure 20-23-81] . NOTE: The bearing can only be removed through the snap ring side of the housing. 442 Excavator 20-23-7 Service Manual