BUCKET CYLINDER (CONT’D) Figure 20-23-109 Assembly (Cont’d) Figure 20-23-107 1 1 P-36191 Tighten the nut (Item 1) [Figure 20-23-109] to 1364 ft.-lb. (1850 N•m) torque. P-36196 Clamp the rod end in a vise. Support the end of the rod with a wood block (Item 1) [Figure 20-23-107] . Use care not to damage the rod. Figure 20-23-110 1 Figure 20-23-108 1 3 2 P-36197 Install a ring compressor on the piston (Item 1) [Figure 20-23-110] and compress the seal to the correct size. P-36190 Leave the piston in the compressor for three minutes. Install the head (Item 1) and piston (Item 2) [Figure 20- 23-108] . Remove the rod assembly from the vise.
Apply thread lock adhesive (Loctite™ 270) to the rod threads and install the nut (Item 3) [Figure 20-23-108] . 442 Excavator 20-23-14 Service Manual