BLADE CYLINDER Figure 20-24-3 Testing Put the bucket on the ground. Figure 20-24-1 2 1 P-36029 Install a plug (Item 1) [Figure 20-24-3] on the hose. Start the engine and retract the blade cylinders. P-36027 If there is any oil leakage from the base end fitting (Item 2) [Figure 20-24-3] on the blade cylinders, remove the cylinders for repair or replacement. Raise the blade, and support with jack stands [Figure 20-24-1] . Stop the engine. With the engine off and the key in the run position, move the blade lever to relieve hydraulic pressure. Figure 20-24-2 1 P-36028 Remove the hydraulic hose (Item 1) [Figure 20-24-2] from the base end of the blade cylinders.
442 Excavator 20-24-1 Service Manual