Bobcat Company 442 — Assembly

BLADE CYLINDER (CONT’D) Figure 20-24-42 Assembly (Cont’d) Figure 20-24-40 1 1 2 2 P-35985 3 Install the bearing (Item 1) and snap ring (Item 2) [Figure 20-24-42] in the base end of the cylinder. P-35984 Install the head (Item 1) and piston (Item 2) [Figure 20- 24-40] . Figure 20-24-43 Apply thread lock adhesive (Loctite™ 270) to the threads of the rod and install the nut (Item 3) [Figure 20-24-40] . Support the rod with a wood block and tighten the nut to 1143 ft.-lb. (1550 N•m) torque. Figure 20-24-41 1 P-35986 Install the check valve (Item 1) [Figure 20-24-43] . P-35983 Use a ring compressor to compress the seal to the correct size.

Leave the piston in the compressor for three minutes [Figure 20-24-41] . Remove the rod assembly from the vise. 442 Excavator 20-24-13 Service Manual