Bobcat Company 442 — Assembly

BLADE CYLINDER (CONT’D) Figure 20-24-46 Assembly (Cont’d) 1 Figure 20-24-44 P-35989 Install the ten bolts (Item 1) [Figure 20-24-46] and tighten to 114 ft.-lb. (155 N•m) torque. P-35987 Clamp the base end of the cylinder housing in a vise [Figure 20-24-44] . Figure 20-24-47 Use care not to damage the cylinder housing. 1 Figure 20-24-45 3 2 2 P-35990 1 Install the clamps (Item 1) and blocks (Item 2) [Figure 20-24-47] on the cover. P-35988 Support the end of the housing with a block (Item 1) and install the rod assembly (Item 2) until the head (Item 3) [Figure 20-24-45] is fully seated in the housing. 442 Excavator 20-24-14 Service Manual