PRESSURE REDUCING VALVE (S/N 522311001 & ABOVE) Figure 20-33-2 Description The pressure reducing valve lowers system pressure to 508 PSI (35 bar) for joystick operation. 1 Testing Open the rear cover. Figure 20-33-1 P-33376 1 The pressure at the gauge (Item 1) [Figure 20-33-2] should be 508 PSI (35 bar). P-33048 Install a 1000 PSI (69 bar) pressure gauge on the test coupler (Item 1) [Figure 20-33-1] . Start the engine. Move the speed control lever to the high speed position. Lower the left console. Raise the boom and fully extend the bucket cylinder. Record the pressure. 442 Excavator 20-33-1 Service Manual