PRESSURE REDUCING VALVE (S/N 522311001 & ABOVE) (CONT’D) Adjustment Stop the engine. With the engine off and the key in the run position, move the joysticks to relieve hydraulic pressure. Figure 20-33-3 1 P-33378 The pressure reducing valve (Item 1) [Figure 20-33-3] is located to the right of the hydraulic reservoir. Figure 20-33-4 2 3 1 P-33377 Cut and remove the wire (Item 1) [Figure 20-33-4] . Loosen the lock nut (Item 2) [Figure 20-33-4] . Turn the adjustment screw (Item 3) [Figure 20-33-4] in to increase the pressure and out to decrease the pressure. Tighten the lock nut and retest the valve. 442 Excavator 20-33-2 Service Manual