Bobcat Company 442 — Disassembly And Assembly

THREE SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-41-9 Disassembly And Assembly Figure 20-41-7 1 1 2 P-35764 1 Remove the3 O-rings (Item 1) [Figure 20-41-9] from the boom offset valve section. P-35762 Remove the valve section (Item 2) [Figure 20-41-9] . Remove the 4 tie rod nuts (Item 1) [Figure 20-41-7] . Figure 20-41-10 Installation: Tighten the nuts to 16-19 ft.-lb. (22-26 N•m) torque. Figure 20-41-8 1 1 P-35765 2 Remove the 3 O-rings (Item 1) [Figure 20-41-10] from the blade valve section. P-35763 Remove the valve section (Item 2) [Figure 20-41-10] . Remove the outlet section (Item 1) [Figure 20-41-8] . 442 Excavator 20-41-4 Service Manual