Bobcat Company 442 — Boom Offset And Blade Valve Section Disassembly And Assembly

THREE SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-41-23 Boom Offset And Blade Valve Section Disassembly And Assembly (Cont’d) Figure 20-41-21 1 1 1 P-35778 Remove the spool (Item 1) [Figure 20-41-23] from the valve. P-35776 Place the spool in the hardwood blocks. Install a wrench (Item 1) [Figure 20-41-21] on both ends of the spool. Remove the bolt. Place the spool/blocks in a vise. NOTE: Do not use anything other than hardwood blocks to grip the spool, or the spool will be damaged. Installation: Tighten the bolt to 80-97 in.-lb. (9-11 N•m) torque. Figure 20-41-22 Figure 20-41-24 1 1 2 1 P-35777 P-35779 Remove the bolt (Item 1) [Figure 20-41-24] .

Remove the spring seats (Item 1) and spring (Item 2) [Figure 20-41-22] . Installation: Tighten the bolt to 80-97 in.-lb. (9-11 N•m) torque. 442 Excavator 20-41-8 Service Manual