Bobcat Company 442 — Boom Offset And Blade Valve Section Disassembly And Assembly

THREE SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-41-19 Boom Offset And Blade Valve Section Disassembly And Assembly (Cont’d) Figure 20-41-17 2 1 1 P-35774 1 2 Remove the two screws (Item 1) [Figure 20-41-19] from both ends. P-35772 Installation: Tighten the screws to 48-58 in.-lb. (5,4-6,6 N•m) torque. Remove the O-ring (Item 1) and seal ring (Item 2) [Figure 20-41-17] . Remove the valve end cover (Item 2) [Figure 20-41-19] from both ends. Figure 20-41-18 Figure 20-41-20 2 1 1 1 P-35773 P-35775 Remove the O-rings (Item 1) and back-up ring (Item 2) [Figure 20-41-18] . Remove the O-ring (Item 1) [Figure 20-41-20] . 442 Excavator 20-41-7 Service Manual