THREE SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-41-15 Boom Offset And Blade Valve Section Disassembly And Assembly 1 NOTE: The disassembly and assembly procedure is shown on the boom offset valve section. The procedure is the same on the blade valve section except where noted. 1 Figure 20-41-13 1 P-35769 Remove the load check valves (Item 1) [Figure 20-41- 15] . NOTE: The blade valve section is equipped with plugs. Figure 20-41-16 P-35767 Remove the plug (Item 1) [Figure 20-41-13] . Installation: Tighten the plug to 46-57 ft.-lb. (63-77 N•m) torque. Figure 20-41-14 1 2 3 3 P-35771 Remove the plug (Item 1), spring (Item 2) and poppet (Item 3) [Figure 20-41-16] from the valve body.
1 2 P-35768 Remove the seat (Item 1) and spring (Item 2) [Figure 20- 41-14] from the plug. Remove the O-ring (Item 3) [Figure 20-41-14] . 442 Excavator 20-41-6 Service Manual