THREE SPOOL HYDRAULIC CONTROL VALVE (CONT’D) Figure 20-41-28 Inlet/Upperstructure Swing Valve Section Disassembly And Assembly Figure 20-41-26 2 1 1 P-35782 1 Remove the two screws (Item 1) [Figure 20-41-28] from both ends. P-35781 Installation: Tighten the screws to 48-58 in.-lb. (5,4-6,6 N•m) torque. Remove the plug (Item 1) [Figure 20-41-26] . Remove the valve end cover (Item 2) [Figure 20-41-28] from both ends. Installation: Tighten the plug to 46-57 ft.-lb. (63-77 N•m) torque. Figure 20-41-29 Figure 20-41-27 3 1 1 2 P-35775 P-35768 Remove the O-ring (Item 1) [Figure 20-41-29] . Remove the seat (Item 1) and spring (Item 2) [Figure 20- 41-27] from the plug.
Remove the O-ring (Item 3) [Figure 20-41-27] . 442 Excavator 20-41-10 Service Manual