Bobcat Company 442 — Load Sense Relief Valve Adjustment

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-27 Pump Testing (Cont’d) Figure 20-50-25 1 1 P-40560 Remove the cap (Item 1) [Figure 20-50-27] from the pump margin spool (bottom spool). P-40579 Figure 20-50-28 Connect the OUTLET side of the hydraulic tester (Item 1) [Figure 20-50-25] to the reservoir cover. Figure 20-50-26 2 1 1 P-40562 Loosen the nut (Item 1) and turn the adjustment screw (Item 2) [Figure 20-50-28] all the way in (approximately 6 turns). P-40580 Fully open the hydraulic tester flow control (Item 1) [Figure 20-50-26] . Start the engine and run at high idle. 442 Excavator 20-50-12 Service Manual