HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Pump Testing (Cont’d) Remove the hydraulic tester, fittings and hydraulic reservoir cover. Install the original reservoir cover. Install the supply hose on the hydraulic control valve. Figure 20-50-32 1 P-40562 Adjust the pump margin spool (Item 1) [Figure 20-50-32] back to the original position (approximately 6 turns out). Retest and adjust the pump margin spool as needed. See “Pump Margin Pressure Adjustment” on page 7. ALL PUMP ADJUSTMENTS ARE NOW COMPLETED 442 Excavator 20-50-14 Service Manual