HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-63 Torque Limiter Valve Assembly 3 Clean all the parts in solvent and dry with compressed air. 4 1 Inspect seats and spools for wear. 2 Apply clean oil to new O-rings and spools. The following procedures are only used if the adjustment assembly is removed. Figure 20-50-62 P-35327 1 Install the O-ring washer (Item 1) on the adjustment screw (Item 2) [Figure 20-50-63] . Install the adjustment screw (Item 2) in the adjustment body (Item 3) [Figure 20-50-63] . Install the nut (Item 4) [Figure 20-50-63] on the adjustment body. Figure 20-50-64 P-35328 Install the O-ring (Item 1) [Figure 20-50-62] in the torque motor valve body.
1 P-35325 Install the adjustment screw/adjustment body (Item 1) [Figure 20-50-64] assembly into the valve body. 442 Excavator 20-50-25 Service Manual