Bobcat Company 442 — Pump Control Disassembly And Assembly

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-84 Pump Control Disassembly And Assembly Figure 20-50-82 4 3 1 2 1 P-35335 Remove the adjustment screw (Item 1), nut (Item 2), and O-ring washer (Item 3) from the adjustment assembly (Item 4) [Figure 20-50-84] . P-35332 Remove the adjustment assembly (Item 4) [Figure 20- 50-84] . Remove the three O-rings (Item 1) [Figure 20-50-82] from the valve. Figure 20-50-85 Pump Margin Control Figure 20-50-83 2 3 2 3 1 4 1 P-35344 P-35333 Remove the adjustment seat (Item 1), large spring (Item 2), and the small spring (Item 3) [Figure 20-50-85] from the adjustment assembly.

Before disassembling the pump margin control, remove the cap (Item 1) and O-ring washer (Item 2) [Figure 20- 50-83] from the adjustment assembly. Remove the O-ring (Item 4) [Figure 20-50-85] . Measure the adjustment screw (Item 3) [Figure 20-50- 83] thread length for the correct initial adjustment. 442 Excavator 20-50-33 Service Manual