Bobcat Company 442 — Disassembly

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-114 Disassembly (Cont’d) 1 Figure 20-50-112 2 1 3 P-35354 Remove the retaining ball (Item 1) [Figure 20-50-114] . N-23392 Figure 20-50-115 Slide the rotary group (Item 1) and swash plate (Item 2) from the shaft assembly (Item 3) [Figure 20-50-112] . 1 NOTE: It is NOT important that the pistons are installed in their original positions. NOTE: Check that there are no scratches or metal deposits on the sliding surface. (Pistons must be replaced in sets.) 1 1 Figure 20-50-113 P-35355 1 Inspect the 3 pins (Item 1) [Figure 20-50-115] for wear and/or damage. NOTE:

The following procedure shown is to disassemble the rotating group for inspection only. The rotating group parts can not be ordered separately and must be ordered as an assembly. P-35361 Remove the retainer plate and pistons (Item 1) [Figure 20-50-113]. 442 Excavator 20-50-42 Service Manual