Bobcat Company 442 — Assembly

HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-167 Assembly (Cont’d) Figure 20-50-165 1 1 P-35366 Align the marks and install the port block assembly (Item 1) [Figure 20-50-167] on the pump housing. P-35364 Figure 20-50-168 Install the spring (Item 1) [Figure 20-50-165] on the piston. 2 Figure 20-50-166 1 1 1 1 P-35367 1 Install the 4 mounting bolts (Item 1) [Figure 20-50-168] and tighten to 88 ft.-lbs. (119 Nm) torque. P-35365 Remove the aligning rod (Item 2) [Figure 20-50-168] from the pump housing. Install a 0.1835 inch (4,76 mm) rod (Item 1) [Figure 20- 50-166] through the spring and into the hole of the piston. 442 Excavator 20-50-56 Service Manual