HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Pump Control Removal And Installation Figure 20-52-72 1 P-58599 Mark the tubeline (Item 1) [Figure 20-52-72] for correct assembly. Loosen and remove the tubeline (Item 1) [Figure 20-52- 72] from the pump control and torque limiter valve. Figure 20-52-73 2 1 1 P-58609 Remove the 4 bolts (Item 1) and remove the pump control (Item 2) [Figure 20-52-73] from the hydraulic piston pump. Installation: Tighten to 10 ft.-lb. and (13 N•m) torque. 442 Excavator 20-52-29 Service Manual