HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-76 Pump Control Disassembly And Assembly Figure 20-52-74 4 2 1 3 1 N-23359 Remove the adjustment screw (Item 1) jam nut (Item 2), and O-ring washer (Item 3) from the adjustment assembly (Item 4) [Figure 20-52-76] . P-58610 Remove the adjustment assembly (Item 4) [Figure 20- 52-76] from the pump control assembly. Remove the 3 O-rings (Item 1) [Figure 20-52-74] from the valve. Figure 20-52-77 Pump Margin Control Figure 20-52-75 2 4 1 1 3 3 N-23360 2 N-23358 Remove the adjustment seat (Item 1) [Figure 20-52-77] from the adjustment assembly.
Before disassembling the pump margin control, remove the cap (Item 1) and O-ring washer (Item 2) [Figure 20- 52-75] from the adjustment assembly. Remove the large spring (Item 2) and the small spring (Item 3) [Figure 20-52-77] from the adjustment assembly. Measure the adjustment screw (Item 3) [Figure 20-52- 75] , thread length for the correct initial adjustment. Replace the O-ring (Item 4) [Figure 20-52-77] before installation. 442 Excavator 20-52-30 Service Manual