HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-94 Disassembly IMPORTANT 1 When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system. I-2003-0888 P-58598 Clean the outside of the hydraulic piston pump. Remove the O-ring (Item 1) [Figure 20-52-94] . Remove the torque limiter valve. See “Torque Limiter Valve Removal and Installation” on page 17. Figure 20-52-95 Remove the pump control assembly. See “Pump Control Removal And Installation” on page 29.
Figure 20-52-93 1 1 2 P-58611 1 Remove the screw (Item 1) [Figure 20-52-95] from the pin assembly. P-58597 Remove the bolts (Item 1) and inlet fitting (Item 2) [Figure 20-52-93] . 442 Excavator 20-52-36 Service Manual