HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-98 Disassembly (Cont'd) Figure 20-52-96 2 1 1 3 P-58614 1 Remove the 4 bolts (Item 1) [Figure 20-52-98] . P-58612 2 Remove the block port assembly (Item 2) [Figure 20-52- 98] from the pump. Remove the pin assembly (Item 1) [Figure 20-52-96] . Figure 20-52-99 NOTE: The position of the dowel pin (Item 2) on the pin assembly, with the locating hole on the swash plate cradle (Item 3) [Figure 20-52-96]. 1 Figure 20-52-97 2 3 1 N-23386 Remove the O-ring (Item 1) [Figure 20-52-99] . Remove the destroking piston (Item 2) [Figure 20-52- 99] .
P-58613 Remove the plug (Item 1) [Figure 20-52-97] from the pump housing and drain the oil. Remove the stroking piston/spring assembly (Item 3) [Figure 20-52-99] . Mark the pump housing for proper installation. 442 Excavator 20-52-37 Service Manual