HYDRAULIC PISTON PUMP (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 20-52-114 Disassembly (Cont'd) Figure 20-52-112 1 2 1 2 N-15284 Press the shaft (Item 1) from the bearing (Item 2) [Figure 20-52-114] . N-23393 Figure 20-52-115 Remove the cradle (Item 1) from the shaft (Item 2) [Figure 20-52-112] . Figure 20-52-113 1 3 3 N-23394 1 2 Remove the snap ring (Item 1) [Figure 20-52-115] from the housing. N-23395 Loosen and remove the bolt (Item 1) and remove the torque limiter plate (Item 2) [Figure 20-52-113] . NOTE: The caps (Item 3) [Figure 20-52-113] cannot be replaced, a new cradle must be ordered. 442 Excavator 20-52-41 Service Manual