TRAVEL MOTOR (CONT’D) Figure 20-70-129 Assembly (Cont’d) 1 Figure 20-70-127 1 P-61811 Shake off the excess alcohol and install the seal ring assembly (Item 1) [Figure 20-70-129] . P-61785 Shake off the excess alcohol and install the seal ring assembly (Item 1) [Figure 20-70-127] on the hub. Use firm even pressure to pop the O-ring into the housing. Use firm even pressure to pop the O-ring into the housing. Apply a light film of oil to the metal seal ring. NOTE: Do not get any oil on the rubber O-ring. Apply a light film of oil to the metal seal ring. Figure 20-70-130 NOTE: Do not get any oil on the rubber O-ring. Figure 20-70-128 P-61812 P-61786 Check the seal stand off height.
The stand off height must be uniform with no twists in the O-ring [Figure 20- 70-130] . Check the seal stand off height. The stand off height must be uniform with no twists in the O-ring [Figure 20- 70-128] . 442 Excavator 20-70-34 Service Manual